08 to 0.45 and CODCr reduced 71.5% after an 80-min electrolysis, with 0.3 mM Fe2+ solution. The non-biodegradable chemical pollutants from the first stage AO process were degraded by EF. https://www.selleckchem.com/products/disodium-phosphate.html The non-biodegradable pollutants identified by LC-MS/MS in the effluent from AO process including aminopyrine, oxadixyl and 3-methyl-2-quinoxalinecarboxylic acid could be degraded by EF process, with the removal rates of 81.86%, 34.39% and 7.13% in 80 min, and oxytetracycline with the removal rate of 100% in 20 min. Therefore, electro-Fenton with the new CeO2-doped MWCNTs cathode electrode will be a promising supplement for advanced treatment of pig farm wastewater.Novel pectin derived from sweet potato residue was modified by high hydrostatic pressure (HHP)-assisted pectinase and then used for Pb2+ removal from aqueous solutions. The removal characteristics and mechanisms were also investigated. Results showed that modified sweet potato pectin exhibited greater adsorption performances for Pb2+ than that of natural ones, and showed excellent eco-friendly properties and good potential for adsorption of some other heavy metals (such as Cu2+). The adsorption curves were much more conformed to Langmuir model, and the highest capacity for Pb2+ adsorption was 263.15 mg/g with 1.00% pectin at pH 7. Chemical adsorption process of pectin for Pb2+ absorption involved O-containing functional groups (O-H, COO-), cation exchange, and along with electrostatic interactions. Overall, the results in this study indicated that sweet potato pectin modified with HHP-assisted pectinase had the potential to become an environmentally friendly coagulant-flocculant agent for the heavy metal adsorption, especially for Pb2+.The study of soil potentially toxic elements (PTE) contents and establishment of the geochemical characterization of areas which have never been studied is of great concern. In 2019, soil survey of the Armavir region (Armenia) was conducted in order to investigate the spatial pattern of PTE, reveal PTE geochemical associations and assess the origin-specific health risks. The application of compositional data analysis and geospatial mapping allowed to identify two clusters of samples. The first cluster was spatially located on volcanic rocks and was represented by Fe, Co, Mn, Ti, Zn, Ba, Pb suggesting a natural origin of PTE in these areas. The second cluster was allocated on the alluvial, deluvial, and proluvial sediments and represented by As, Cu, Cr, Ni. Such combination of elements in the same group indicates the anthropogenic introduction of some quantities of PTE. The latter is confirmed by the presence of outliers and extreme values for As, Cu and Ni, as well as by the spatial colocation of Fe, Mn, Co, Pb, Zn outliers and extreme contents. The health risk assessment showed that for children the multi-elemental non-carcinogenic risk was detected, while for the adults the non-carcinogenic risk and carcinogenic risk were below the allowable level. The detailed study of the risk levels showed that in first cluster comparatively higher risk were observed for Pb, V, Ba, Zn while in the second cluster Fe, Co, Mn, As, Cr, Cu, Ni. The results indicated the necessity of additional in-depth studies with special focus on bioavailability of PTE.The environment is affected by agricultural, domestic, and industrial activities that lead to drastic problems such as global warming and wastewater generation. Wastewater pollution is of public concern, making the treatment of persistent pollutants in water and wastewater highly imperative. Several conventional treatment technologies (physicochemical processes, biological degradation, and oxidative processes) have been applied to water and wastewater remediation, but each has numerous limitations. To address this issue, treatment using bimetallic systems has been extensively studied. This study reviews existing research on various synthesis methods for the preparation of bimetallic catalysts and their catalytic application to the treatment of organic (dyes, phenol and its derivatives, and chlorinated organic compounds) and inorganic pollutants (nitrate and hexavalent chromium) from water and wastewater. The reaction mechanisms, removal efficiencies, operating conditions, and research progress are also presented. The results reveal that Fe-based bimetallic catalysts are one of the most efficient heterogeneous catalysts for the treatment of organic and inorganic contamination. Furthermore, the roles and performances of bimetallic catalysts in the removal of these environmental contaminants are different.Air pollution is the most serious environmental issue in Vietnam, particularly in big cities. Air pollutants that are set as environmental standards are regularly monitored by the public institutions. Whereas, environmental data on organic micro-pollutants in atmospheric particulate matters (APMs) is limited, including PAHs and POPs. Although massive pesticides are used in big cities, their data in APMs in Vietnam is very scarce. In order to elucidate their occurrence in the ambient air in Hanoi and their health effects, we surveyed 107 insecticides in APMs by a novel target screening method using LC-QTOF-MS-SWATH. A total of 19 insecticides were detected in the dry and the rainy seasons. Among them, 16 substances are, to our knowledge, reported for the first time in the literature. Their total concentrations varied from 0.47 to 27.0 ng m-3 (median, 3.6 ng m-3), detection frequencies of 12 compounds are higher than 42%, and the number of insecticides detected per each sample ranging from 5 to 13 (median, 9). Total concentrations in the dry season were generally higher than in the rainy season, and concentrations at night were higher than daytime in both seasons. The level of insecticides depends not only on the season, but also on its physicochemical properties, its application conditions, and the meteorological conditions. Their emission sources could be related to agricultural usage, floricultural activities, and pest control in houses. The total maximum daily intake (DIair) through inhalation for adults and children were 2.39E-05 mg kg-1 d-1 and 2.98E-05 mg kg-1 d-1, respectively. The highest Hazard Quotients (HQs) were 1.34E-03 and 3.37E-03, and the highest Hazard Indices (HIs) were 2.71E-03 and 6.33E-03 for adults and children, respectively. All values of HQs, and HIs of insecticides were less than 1, indicating that health risk would be negligible.